Which digital converter boxes for antenna are compatible with my TiVo DVR?
Email this page
*All fields required unless otherwise indicated.
Planning to purchase a digital-to-analog converter box to use with your antenna and TiVo Series2 DVR? Please make sure your DVR has software version 9.3.1 or later, and check the table below to make sure your converter box is supported.
- For instructions on setting up your Series2 DVR with a digital converter box, click here.
- To set up your Series2 DVR with a digital converter box and satellite receiver, click here.
NOTE: Series2 DVRs with either a 649 (Dual Tuner) or a 542 prefix do not have an antenna connector; they are designed to accept either cable or satellite as a programming source. For complete information about antenna support for all TiVo DVR models, go to Digital antenna support.
Model Name and Number |
Supported? |
IR Code |
Access DTA1010D |
YES |
10094 |
Apex DT250 |
YES |
10098 |
Artec T3A Pro |
NO |
|
Cadence DTVC9 |
YES |
10097 |
Channel Master CM-7000 |
YES |
10092 |
Coship N9988T |
YES |
10095 |
Digital Stream DTX 9000 and DTX9950 |
NO |
- |
General Electric 22729 |
YES |
10102 |
DISH Network DTVPal |
NO |
- |
Insignia NS-DXA1* |
YES |
10090 |
Lasonic LTA-260 |
YES |
10091 |
Magnavox TB100MW9 |
YES |
10086 |
Microgem MGMG2000 |
YES |
10096 |
Motorola DSR-550 |
NO |
- |
Philco TB100HH9 |
YES |
10101 |
RCA DTA800 |
YES |
10087 |
Sansonic FT-300A |
YES |
10091 |
Tivax STB-T9 |
YES |
10103 |
Venturer STB7766G |
YES |
10093 |
Winegard RCDT09 |
YES |
10099 |
Zenith DTT900 and DTT 901 |
YES |
10090 |
Zinwell ZAT 970A ** |
YES |
10112 |
* Insignia NS-DXA1 with a build date prior to 06/2008 may have stability issues.
** If the suggested IR code for the Zinwell ZAT 970A does not work, try the code for the General Electric 22729 (10102).
Details 
Please rate this article to help us improve your web support experience
