See the charts below for LED functionality:Power LED
Powered on. If other LEDs are blue, connected at 5 GHz.
Powered on. If other LEDs are green, connected at 2.4 GHz.
Flashing green (slow flash):
WPS connection in progress.
WPS connection successful at 5 GHz; will turn off after 2 minutes.
WPS connection successful at 2.4 GHz; will turn off after 2 minutes.
WPS error. WPS setup has failed, please try again or use the <<Setup Wizard>>
WPS connection successful (after two minutes) or not yet initiated.
Signal Strength LED
Flashing Blue (slow flash):
Configured for 5 GHz connection but not yet connected.
Flashing Green (slow flash):
Configured for 2.4 GHz connection but not yet connected.
Connected at 5 GHz.
Connected at 2.4 GHz.
One bar illuminated:
Low signal strength.
Two bars illuminated:
Medium signal strength.
Three bars illuminated:
High signal strength.